On Tue, Nov 18, 2014 at 11:04 AM, Chris Radek <[email protected]> wrote:
> On Tue, Nov 18, 2014 at 09:04:18AM -0500, Mark Wendt wrote: > > > At X1, the table height is .001" lower than X0. X2 is .003" lower > > than X0. X3 is .002 lower. X4 is .001 lower. X5 is .002 lower. > > X6 is .003 lower. X7 is .004 lower. X8 is .002 lower. X9 is > > .001 lower. > > Not having seen how your fixtures are mounted to this table, this > may or may not be a useful suggestion, but for a similar problem I > have used feeler gauge stock, which is available in .0005" > increments in these small thicknesses. Like these: > > http://www.use-enco.com/CGI/INPDFF?PMPAGE=381&PARTPG=INLMK32 > Chris, There are no fixtures. The table is the vacuum hold-down. The strip sits on top of the table, and the vacuum holds it in place. I have shimmed the table as best I can on the machine, but that's as far as it gets. ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
