I have tried with USB isolator made with Icoupler devices from analog devices 
on other products without luck. I am using ethernet which I think have a 
isolation transformer. I do not think there are any tolerances for missed 
packets right now. For serial communication I have tried opto couplers without 
with some improvement. I have also tried isolation devices from I think Texas 
instruments made from differential drive over two capacitors and they are great 
but I do not think I could use them for 100Mbit ethernet.

I will increase tolerance for missed packets to be able to measure percentage 
of lost packets, it is not perfect but better than nothing. I will also add a 
common mode inductor and maybe a shielded cable.

I have encountered the problem on several products so it is not isolated to 
just this one I built myself.


Nicklas Karlsson




On Wed, 26 Nov 2014 19:28:25 +0200
Marius Liebenberg <mar...@mastercut.co.za> wrote:

> I have had many problems with USB communications with motors and plasma. 
> You can overcome these by putting an electrically isolated barrier in 
> the usb line. There are some chips from Linear (LTM2448) that will do 
> just that. The equipment on either end cannot be connected to the same 
> ground or supply if you go this route.
> 
> On 2014-11-26 19:07, Karlsson & Wang wrote:
> > PWM is great for efficient motor but unfortunately it is also very good at 
> > disturbing digital communication. Do anybody had any problems with the 
> > communication errors then motor start?
> >
> > Nicklas Karlsson
> >
> > ------------------------------------------------------------------------------
> > Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> > from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> > with Interactivity, Sharing, Native Excel Exports, App Integration & more
> > Get technology previously reserved for billion-dollar corporations, FREE
> > http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> > _______________________________________________
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users
> >
> 
> -- 
> 
> Regards /Groete
> 
> Marius D. Liebenberg
> +27 82 698 3251
> +27 12 743 6064
> QQ 1767394877
> 
> 
> ------------------------------------------------------------------------------
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
> http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users

------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to