Hi all
I have been trying to join the forum but can't get past the registration
page, says there are errors:(
I have a question about setting up a bipod hot wire cutter. Simply, in CAD
I have figured out that on my dream machine setup, at a 4' 6" cutting
length when the wire is angled 22.5 degrees on the vertical axis the wire
moves 3mm from its intended position due to the attach points swinging in
to compensate for the shortening of its length. Its obviously less then
this with lesser angles but still significant when cutting wing cores, etc.
On the horizontal plane it happens in 2 directions. Does LinuxCNC have skew
compensation built in to account for this or can it be fixed with a config
file/HAL correction??? I hope this makes sense....Thanks for any
knowledge/answers....
Dan
------------------------------------------------------------------------------
Dive into the World of Parallel Programming! The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
