I did not connect Virtual D1 and D2 since it was getting confusing. Obviously, the virtual position isn't 22.5 degrees.
On Tue, Jan 6, 2015 at 10:08 PM, poormansairforce H < poormansairfo...@gmail.com> wrote: > Thanks Andy, thats good to know. I've attached some pics to better explain > the errors. I need to dig thru some of the files but I'm still looking for > a PC that will run LinuxCNC good enough. I've tested several and the > latency has been ugly on all of them. Since this is my first time messing > with LinuxCNC I'm not familiar with the whole setup particularly the > terminology so I have my work cut out. > > On Tue, Jan 6, 2015 at 7:42 PM, andy pugh <bodge...@gmail.com> wrote: > >> On 7 January 2015 at 00:39, poormansairforce H >> <poormansairfo...@gmail.com> wrote: >> >> > The link that Andy posted:http://www.cnc-hotwire.de/ is exactly what I >> have >> > in mind. These are accurate as long as the wire is not angled more than >> a >> > small amount. >> >> Adding further corrections is just geometry, so can be included in the >> kinematics file. >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> Dive into the World of Parallel Programming! The Go Parallel Website, >> sponsored by Intel and developed in partnership with Slashdot Media, is >> your >> hub for all things parallel software development, from weekly thought >> leadership blogs to news, videos, case studies, tutorials and more. Take a >> look and join the conversation now. http://goparallel.sourceforge.net >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
