When you want 5 axis verification your choices are severely limited and very expensive. On Feb 8, 2015 3:00 PM, "andy pugh" <bodge...@gmail.com> wrote:
> On 8 February 2015 at 20:41, Kirk Wallace <kwall...@wallacecompany.com> > wrote: > >> I found this because I am trying to find the best way to build a gcode > >> verification application. > >> I want to translate the gcode to OpenSCAD instructions so I can remove > the > >> material described by the gcode motion from a solid model imported into > >> OpenSCAD. > > There are existing software packages that do that. Is this a wheel > than needs to be reinvented? > > http://www.cutviewer.com is one I know of. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming. The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is > your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
