On 02/26/2015 11:59 PM, Karlsson & Wang wrote: > Do anybody know where it might be possible to find the scaling constants for > a Agiecut AT 200 EDM machine? > > I could count and measure myself but lack the correct intruments for accurate > measurements. > > > Nicklas Karlsson > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for all > things parallel software development, from weekly thought leadership blogs to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ask Larry McNamee http://www.edmcorner.com or Tom Truty www.techstar-edm.com or Dale Snowden ddaal...@msn.com
we all serviced AGies for years you'll need laser to measure the errors you're comping C5 lead screws to get true 1um accuracy so the setup has to be perfect, even temperature and humidity you might consider finding an AGie tech closer than the USA good luck! tomp ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
