On Sat, 25 Apr 2015, John Murphy wrote: > Date: Sat, 25 Apr 2015 17:58:40 -0600 > From: John Murphy <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: Re: [Emc-users] Thoughts on using the Intel Compute Stick, > Linux versions? > > My guess is it would be more trouble than it is worth... > > - You need an RT kernel, so now you have to build it to work with this > hardware. > - USB I/O - Not a good basis IMHO for real time hardware control >
Wheezy should run fine on this so no kernel building needed but as you say but total lack of real time I/O is the killer. (well if you were ambitious some kind of SD card hack might work until they change the hardware) A little bigger but known to run linuxcnc: http://store.hp.com/webapp/wcs/stores/servlet/us/en/mdp/desktops/stream-mini-desktop#!&TabName=vao > > On Sat, Apr 25, 2015 at 4:36 PM, Jack Coats <[email protected]> wrote: >> Just curious, any ideas about the viability of the Linux version of the >> Intel Compute Stick use for CNC? >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
