On Saturday 02 May 2015 12:11:29 Gene Heskett wrote: > On Saturday 02 May 2015 10:05:51 Erik Christiansen wrote: > > > I don't see a thing in that.
I went out and wrote the code for the taperlock hubs tapered portion. Loaded it up into LCNC that I had just started, fixed a coule typu's, looked good on the backplot, stepped it in far enough to start the first pass thru the while loop, and about 1/2" to the left of the startpoint, the spindle coasted to a stop, every led on the breakout board at full brightness, its an older cnc4pc C1G board. lcnc screen looks good, like its running fine but everythiung is frozem where it was. No mouse, no keyboard. Come back in here, clicked on my thread to send this message, but this box is locked. reset reboot this one to get rid of the nfs mount of lathe. So now I can open the thread and send a new msg. Lathe is not reachable by the usual ssh -Y lathe from a cli. So its still crashed locked whatever. Good video, but the only response will be from the reset button. So I will go do that, load lcnc again, home everything and redo the touchoffs to get back to my starter point, and see if it will run without the nfs sharing, but the nfs stuff itself will still be running on the reboot. The psu I ordered, that only looks like the right shape & mounting, will not be here till next friday. Dammit. But I see zero flickers in the video output when it freeses. I need more clues. I'll go see if there is a kern.log or whatever once I hit the reset button & reboot it. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
