After trying to recreate this I have discovered that this happens every time that I issue a command to turn my spindle on and then off (via Modbus). If I command the spindle on/off either in the manual control or with an M3 SXXX and then M2. If I do that, immediately thereafter no commands will execute in the MDI window unless I go back to manual control and then come right back to MDI and try again. -Tom
> I don’t know if this is a bug in 2.7~pre6 or my config/operation problem. > Sometimes I go into MDI screen and issue a command and nothing happens. It > doesn’t execute the command and I don’t get an error in my terminal window > where I launched Linuxcnc or any indication why it failed within Axis. I > can’t seem to find an error or in any log, there is just nothing. I can > issue a command 5 or 6 times, nothing. Usually, but not always, if I go to > the manual control screen and then back to MDI I can execute the command. > ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
