It works now thanks very much On 15-05-24 03:25 AM, Philipp Burch wrote: > On 24.05.2015 12:18, linden wrote: >> I m sure I have seen mention of what I am looking for on this list but >> now I need it I cant seem to fined it. >> What I am looking for is the file or script that sets the machine state >> on start up. List G90 G17 ect. I am using the Linuxcnc sim to check G >> code but need to set the G2 G3 I and J values to be interpreted as >> absolute rather than relative. I have an old grumpy Dynapath 20 that >> only seems to except arcs in this form. As soon as its made enough money >> to pay for it its getting upgrade to linuxcnc. > Hi, > > I suppose the option you are looking for is RS274NGC_STARTUP_CODE in the > machine config INI file: > http://www.linuxcnc.org/docs/html/config/ini_config.html#sub:RS274NGC-section > > Regards, > Philipp > > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
