Good Morning Gentleman, I am trying to figure out how to shut off my thru spindle coolant, with the M09 command,
If the standard flood coolant, or mist even for that matter is currently on, and you issue an M09 command, that will turn off the halui.flood-is-on command, but I wonder, If I have my thru spindle coolant running, which is controlled by the M27 command, if I enter M09, without flood or mist running with the M08 or M07 commands, is there any action on the halui.flood-is-on, or halui.mist-is-on pins? Do they pulse on then off or anything? I tried to use http://linuxcnc.org/docs/html/remap/structure.html section 5.6, to add additional M28 command to M09, to turn off thru-spindle, to see if it would even remotely work, no luck Any thoughts? -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
