On 3 June 2015 at 08:11, Frederic RIBLE <[email protected]> wrote: > However, when powering off/on linuxcnc, iocontrol.0.tool-number is reset > to 0 and does not reflect any more the tool which is still in the spindle.
iocontrol.0.tool-number isn't necessarily expected to reflect the tool in the spindle. That pin is only active during a tool change. The Axis GUI (if using Axis) will show that the tool is still in the spindle. Also, in the remap code #<tool_in_spindle> should show the right number. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
