You have to installed a tool in the machine using the "T#M6" in mid so LCNC knows what tool it has to work on.
Ray On Jun 6, 2015 7:02 AM, "andy pugh" <bodge...@gmail.com> wrote: > On 6 June 2015 at 14:12, Matt Shaver <m...@mattshaver.com> wrote: > > It's been a long time since I worked with this... What has to be > > declared in the .ini or .hal files to inform Axis that there should be > > a "Tool Table" option in the touch off dialog? > > It is either a "T" at the end of the coordinate system list, or a > completely separate button in Axis. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users