On Saturday 27 June 2015 20:25:29 [email protected] wrote: > How about 602-248-8508. That's what I found looking on the Web.
I did find a different 866 number that got me bounced from dept to dept, spent about 2 hours, but the only resolution was to setup another guest account at a different email address. Zero progress on solving the original, since 2011 problem. However I did manage to send the seller a msg. About an hour & a half ago. No reply yet. > Rick > > > -------- Original Message -------- > Subject: [Emc-users] Next problem, there is always one of those, no? > From: "Gene Heskett" <[email protected]> > Date: Sat, June 27, 2015 4:22 pm > To: "Enhanced Machine Controller (EMC)" > <[email protected]> > > Now it appears the Z posts top plate, carrying the motor and screw, is > miss-made. Except its not, and I am now convinced its the nut mount > bracket. > > When the nuts mounting tab is drawn up, the screw is on a really > severe bind. On checking measurements, the OEM top plates hole for > the thrust bearings and screw is exactly centered on the plate in BOTH > directions. > > However, the new top plate has all this moved nominally 5mm forward, > and it appears the nuts mounting bracket will need to be removed, and > shaved by about that much in order to place the screw actually running > vertically in the post. Remaking the top plate won't do as that will > wreck the zerk sticking out of the back of it. I suspect the bolt was > move forward in the first place just to make running room for the zerk > fitting. > > With the top bolts loose, and drawn as high as it can go with the nut > bracket bolts also loose, the front edge of the plate is sitting solid > on the post, the back edge of the top plate is lifted close to 2mm! > > After the fight with the balls, and 5 did not go back in as I couldn't > find room for them as the tracks were full minus perhaps one ball. So > I re-assembled that, runs nice by gravity alone. > > But this is a bummer. So I need to get in touch with David Clements. > Anyone have a phone number for ebay? > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical & virtual servers, alerts via email & sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
