On Tue, 21 Jul 2015, Curtis Dutton wrote: > Date: Tue, 21 Jul 2015 06:14:46 -0400 > From: Curtis Dutton <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: [Emc-users] 7i64 suddenly missing > > I have a 5i25 running with 2 7i85s cards. I also have a 7i64 for my io > needs. Today I shut down linuxcnc and restarted. The 7i64 is no longer > recognized. Are there any debug settings i can use to more details as to > the possible problem? The 7i64 does have power. > > Thanks, > Curt
If the 7I64 has power, I would make sure 1. None of the 7I64 option jumpers has gotten moved or displaced 2. The serial cable is secure at both ends 3. The RS-422 daughtercard connections are not loose 4. if the 7I64 is powered via the serial cable, make sure that the 5V power measures at least 4.5V at the 7I64 end > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
