On 8/15/15 12:45 PM, Marius Alksnys wrote: > When Axis has big G-code (12MB) in view, jogging with keyboard has lags. > Delays of jog start/stop events are unpredictable. But everything is > normal, when toolpath preview is out of view. > > I tested different keyboards: USB and PS/2 0 still the same. > Tried to play with [DISPLAY] CYCLE_TIME from 0.01 to 0.5 - could not > find satisfiable result. > > GIGABYTE GA-J1900N-D3V, Kingston SSD > > Tested with: > Ubuntu 10 and LinuxCNC 2.7 pre6. > Debian Wheezy, LinuxCNC 2.7 pre6 and pre7.
In general stuff that goes through the UI and Task can not be relied upon to have good realtime behavior. Anything important really needs to go directly to Motion, via HAL. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
