On Tuesday 25 August 2015 05:32:29 andy pugh wrote: > On 25 August 2015 at 10:26, Gene Heskett <[email protected]> wrote: > > That will regain some of the spindle speed lost with the existing > > kits metal pulley, but will require a longer XL belt. I am thinking > > that because I added 6 teeth to the small pulley, I should add 6 > > cogs to the belt length too, but a hair over half of the added teeth > > will not be engaged & that says I need a belt 3 cogs longer. > > See what the calculator here says: > http://www.hpcgears.com/n/left_menu/calc/calc.php
That seems to want to give pulley center to center. I think # of cogs can be extracted from the belt length suggested for a fixed center to center distance, but the selection of belt lengths doesn't see to be fine grained enough. I need to be closer to awake to grok all that. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
