Hi All, Wondering if there is a preference to G73 or G83 for drilling and clearing chips (which I think I want to do for aluminum drilling).
http://linuxcnc.org/docs/html/gcode/gcode.html#sec:G73-Drilling-Cycle http://linuxcnc.org/docs/html/gcode/gcode.html#sec:G83-Drilling-Peck Thanks, Mark ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
