This is not correct- both Mach3 and Mach4 will run fine without a network connection. You do need a connected machine to receive the email license file, but that file can be transferred to the CNC PC by usb stick. Mach4 starts and runs fine without a net connection, I run all my machines that way.
ron ginger On 9/18/2015 7:19 AM, emc-users-requ...@lists.sourceforge.net wrote: > From: Karlsson & Wang <nicklas.karls...@karlssonwang.se> Subject: Re: > [Emc-users] CAD/CAM for LinuxCNC To: "Enhanced Machine Controller > \(EMC\)" <emc-users@lists.sourceforge.net> Message-ID: > <20150918110703.28d7bd541e7bd7b97a4d2...@karlssonwang.se> Content-Type: > text/plain; charset=US-ASCII >>> > >So with MACH3 turning into a networked licensed (must be internet >>> > >connected) > The machine will not start without an internet connection ? ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
