Jim, I can't tell you how helpful these vids will be for folks like me. So many question I had when I first saw the probe program where cleared up. Thank you, and keep em coming.
I had an idea for a video, those hal meters are pretty handy, could you add to the the probe series with a how to to set those meters up? If that's already been covered elsewhere, perhaps a link to point us in the correct direction. Thanks again, Allen On 09/20/2015 06:03 AM, Jim Craig wrote: > The third video in the touch probe series is now available on YouTube. > If you have any questions about the touch probe that I have not answered > in the videos let me know and I will address them. If I have enough > additional questions then I can make a fourth video answering them. > > https://www.youtube.com/watch?v=6S9f0Nkoh8U > > Looks like there is decent response to the channel already so I will > keep working on new episodes. Next ones will be on the basics of LinuxCNC. > > I have not heard any feedback about the logo so I assume that it is OK > to keep using it. Please let me know if I am stepping on toes here. > > Thanks, > > Jim > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
