Gene, Can you attach the G code that you ran?
JT On 10/11/2015 3:51 AM, Gene Heskett wrote: > Greetings all; > > I had asked for an explanation of why the run trace, and the initial > trace, do not align in the backplot, and it was suggested that I was > using something in the G90 to G92 in my code. So It removed any of that > from my code, with no effect detectable in removing them. > > The first thing my code does is take the machine back to its G53 home > position, and when that is reached, the g10 command to zero the global > co-ordinates to that position, this to keep my g55 mods from > accumulating run to run. > > So enclosed is a screen snapshot taken from the simulator, backplot in > overhead view mode, trimmed down to just the backplot window. It exactly > matches what I see on the real machines monitor so its at least > consistent. According to the MDI window, there is a G91.1 in effect, but > it is not in my code. And its not present in any file in the sim-axis > directory. So I assume its an internal default. > > Note from the snapshot that the offset in the Y direction is nominally 2x > that shown in the x direction. The white line segments can be clicked > on if one is patient enough with his clicking, so that the line of code > in the code window is highlighted. If one could call it high lighted, > the colors chosen renders it very close to invisible. Extremely low > contrast result. This needs to be fixed, but I've no clue how. > > None of the traced, red lines are clickable. > > The default co-ordinate map used for reference is G54, the actual > movements are, with the exception of the G38.2 stuff to find and > calibrate it to the contacts on the jig, done in the G55 co-ordinate > map. Are/can these offsets be responsible for the apparent miss-match? > > Thanks all. > > Cheers, Gene Heskett > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
