Thanks Jeff, I loaded it up in a 4-axis sim config. I think my initial idea is wrong about ARC_BLEND_RAMP_FREQ, since all of the blending happens between 4 axes (parabolic blends only).
Just for fun, here's both clips together: http://www.youtubedoubler.com/?video1=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DJKNieuI6Hmo&start1=0&video2=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DS0re79zEX5A&start2=11&authorName=rellenberg It seems like it's running faster in your 2.7 video. Has the configuration / scale changed between those videos? It might sound better if it runs at the same speed. For reference, on my test config, the program takes about 36 seconds on both 2.6 and 2.7. Rob On Mon, Oct 19, 2015 at 9:39 PM, Jeff Epler <[email protected]> wrote: > On Mon, Oct 19, 2015 at 11:30:14PM +0000, Robert Ellenberg wrote: > > would you mind sharing the g-code so I can > > take a look at the slow spots? > > A version of this program is in the sample nc_files as "daisy.ngc". > > It needs to be modified to run on a 3-axis machine, and only "sounds > good" on a high-accel stepper machine with properly configured scales in > the gcode. > > (set XYZA axis scales) > O100 call [6400] [6400] [8000] [80] > > Jeff > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
