I have seen this on my machine which still has 2.4 on, it is on a machine with not enough ram. I make sure unwanted background stuff is not running to avoid it.
Dave On 29/10/2015, Stuart Stevenson <stus...@gmail.com> wrote: > Gentlemen, > re: the cinci at MPM > When they push the arrow key to move an axis the machine keeps moving. A > couple weeks ago the X axis was the only one doing this but now other axes > demonstrate this feature. > They disconnect the keyboard, use the mouse to move the axes with using the > +/- buttons and get the same result. > What should the next focus be to troubleshoot this? > > Ubuntu 8.04 > LinuxCNC 2.4.? > Axis Display > > I know, I know - it needs upgraded. Not possible at this time. > > thanks > Stuart > > -- > Addressee is the intended audience. > If you are not the addressee then my consent is not given for you to read > this email furthermore it is my wish you would close this without saving or > reading, and cease and desist from saving or opening my private > correspondence. > Thank you for honoring my wish. > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users