On Fri, Oct 30, 2015 at 11:03:30PM -0400, Tom Easterday wrote:
> Thanks Jeff. I was using a dial indicator and moving back and forth
> before and after setting "BACKLASH = 0.0005" and found no difference. I
> think I was homed but will verify next time I am at the machine and will
> also try your method to see what the hal pins believe. Is the "+" and
> "-" optional?
> -Tom
"+" denotes what I added, and "-" denotes what I removed:
> > [AXIS_0]
> > ...
> > -BACKLASH = 0.000
> > +BACKLASH = 0.100
> >
so I removed the line that said
BACKLASH = 0.000
and added the one that said
BACKLASH = 0.100
or in other terms, changed 0.000 to 0.100.
This is a typical way that changes are denoted by software developers,
and it slipped into my e-mail without me considering my audience well enough.
(you're not putting in the line that says "..." either)
Jeff
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
