On Wednesday 16 December 2015 11:52:56 Jon Elson wrote: > On 12/16/2015 08:21 AM, Gene Heskett wrote: > Yup, we had a couple hour power outage. Seems that > everything is back up and stable. > > Thanks, > > Jon > We had one here, just over an hours duration according the -wall broadcasts from nut, yesterday morning. My 20kw kicked in just like it should, but that 10 seconds to get it up and delivering, reset the heater in the garage to off, which I neglected to reprogram yesterday after bringing Dee home from getting an eye rebuilt, so it was down to 61 in there this morning about 10ish. Just one 1500 watter generally keeps it in the low 70's even in colder weather than this. Plug in a 2nd one and the rise is about 12F an hour. Its well insulated, even has another layer of R11 styro glued to the overhead door. Edges contoured so it can still make the turns in the tracks, so its probably about R5 overall.
I needed to check the input draw of the 12 volt enable line, to see if I can just parallel a Crydom SSR to crowbar the soft start resistor when the spindle is started. Seems like a 2 birds with one BoB pin to me. ;-) > ---------------------------------------------------------------------- >-------- _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Some mill pix are at: Genes Web page <http://geneslinuxbox.net:6309/gene/GO704-pix> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
