Gregg, Mcmaster Carr has some that are 3 7/8" long, High-Speed M2 Tool Steel, http://www.mcmaster.com/#3009a182/=10c3bni, but for a dollar or so more you you can get a piece of O-1 36" long.
Rick On 12/21/2015 7:39 AM, Dale Ertley wrote: > Try McmasterCarr.com > > On Monday, December 21, 2015 5:58 AM, Sarah Armstrong > <[email protected]> wrote: > > > theirs one thing Andy , if you called , you'd never leave ! LOL > theirs always a cuppa on hand too > > dont take any notice of the stock list , it's always wrong , theirs More !! > (arh ! yes the borer the reminants of having to work with Steam !! ) and > still do . > > > > > On 21 December 2015 at 10:47, andy pugh <[email protected]> wrote: > >> On 21 December 2015 at 10:11, Sarah Armstrong >> <[email protected]> wrote: >>> m-machine-metals.co.uk >> After fossicking about in their web site, it turns out that they have >> a horizontal boring machine, just like the one my dad has. >> >> (Kearns S-type with the facing chuck) >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
