OK, I am unclear on how baud rate gets set. I see the .c code has "void
userinit()", but I don't know how that gets called.
I had tried "loadusr -W wj200_vfd baud 19200" (kind of random stab) and
thought I was setting the baud, but I changed "baud" to gibberish here
("bxyzz") and no error is generated.
So, chances are I'm not setting the baud rate- how do I do that?
Danny
---- dan...@austin.rr.com wrote:
> Not a stupid question at all- I literally didn't do more than I said.
>
> I will try this ASAP.
>
> Do you know how to handle a "watchdog" that continuously checks whether the
> VFD is running?
>
> Danny
>
> ---- Philipp Burch <p...@hb9etc.ch> wrote:
> > Hi Danny!
> >
> > On 29.02.2016 08:15, Danny Miller wrote:
> > > [...]
> > >
> > > loadusr -W wj200_vfd baud 19200
> > > #default slave address is 1
> > > setp wj200-vfd.0.mbslaveaddr 1
> > > setp wj200-vfd.0.commanded-frequency 60
> > > # connect to wj200-vfd pins
> > > net spindle-on wj200-vfd.0.run
> > > net spindle-cw wj200-vfd.0.reverse
> > > net spindle-at-speed wj200-vfd.0.is-at-speed
> > >
> >
> > Maybe it's a stupid question, but: Have you also connected the nets
> > spindle-on, spindle-cw and spindle-at-speed to the motion component?
> >
> > I.e. something like
> >
> > net spindle-on motion.spindle-on
> > net spindle-cw motion.spindle-forward
> > net spindle-at-speed motion.spindle-at-speed
> >
> > See: http://linuxcnc.org/docs/2.7/html/man/man9/motion.9.html
> >
> > Then, wj200-vfd.0.commanded-frequency is actually a pin, which you
> > can/should set dynamically as well:
> >
> > net spindle-rps motion.spindle-speed-out-rps-abs
> > net spindle-rps wj200-vfd.0.commanded-frequency
> >
> > Good luck!
> >
> > Bye,
> > Philipp
> >
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
