Greetings; Specifically; what do I do to cause the machine to move from the camera looking at an x mark on the work, so it moves the machine to be at that X mark, and vice versa?
Apparently there are some "to be user supplied constants" that modify one of the co-ordinate maps to make this a consistent, repeatable move. At least that is how I would do it, but I didn't invent this particular wheel. :) I have a need to write some code which will excavate the top trim board to sink very close to the whole thickness of one of these high friction hinges when it is in the closed position, and it would because a rather simple step and repeat to make a target mark on the wood, bring in the camera offsets, find that mark, touch off to it and move back by that offset, and hit "r" for run, once the code was written to do the excavation work. I have looked at the camon.ngc and camoff.ngc, without the light coming on. Probably my fault so I'll print both & study some more. I would like to write the code once and run it 9 times or more. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
