On Thursday 10 March 2016 11:44:29 Jon Elson wrote: > On 03/10/2016 01:23 AM, Gene Heskett wrote: > > This sounds like an interesting device. Are you at liberty > > to give a range of pricing for one gear and sensor combo? > > The Allegro ATS667LSGTN-T is $8.34 in single quantity at > Digi-Key. That's what I used on my Bridgeport pickup. I > used the existing bull gear on the head as the thing to be > sensed. I did drill a small dimple on the face of the gear > to provide the index pulse. > > Jon > I believe I have seen those pix Jon. Kewl.
I just sent a plea for 5 samples of the 605, which is $8.64 in onsies, to Allegromicro. But I worded it such that if they have one designed to work well with the smaller teeth in my stuff, please substitute. A 6mm total tooth spacing is pretty large as many of the gears in my sized stuff are 35mm to 80mm in diamter with as many as 80 teeth on the large one. And thats smaller teeth than the 605 is designed for. I also found something I didn't look for because I'm still a quart low on coffee and didn't note it in the pdf datasheet, digikey says its an open drain output, so it can easily be made compatible with our stuff with a pullup R to our logics plus rail even if its running on 12 volts. If I get some, and find my round tuit, I'll post as to the results I get. Cheers Jon, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
