On Sat, 2016-03-26 at 00:49 -0600, jeshua wrote: > Greetings, > > I am attempting to assist a friend setting up a HY-JK02-M 5-axis Interface > Board with Axis running HY-DIV168N-3.5A drivers. > > Controller Manual: http://www.tecnoflexo.com.br/site/fotos/download/17/17.pdf > Driver Manual: > http://www.goodluckbuy.com/images/detailed_images2/file/76081%20HY-DIV168N-3_5A.pdf > > Actually, seems like the interface board is all properly configured, but we > cannot get the motor to move. In the stepper config, when we go to test the > drive the stepper comes on and holds its position. We can see the correct > axes led indicator light up when it is commanded to move. But no motion. Axis > launches, and the machine power button works as expected. No motion though. > > I found someone running the same configuration here: > > http://www.technoshamanarchist.net/?p=98 > > It states calculated these values: > > Step time: 30000 ns > Step space: 8500 ns > Direction Hold or Direction Setup values, some people set it to 20000 > > But then thats all it states on the configuration and never confirms if it > those values work or not (next post is running). We have the cards wired up > exactly the same as shown in the pictures. > > Also, in videos I have seen of the driver in action, they have two red LEDs > lit, we only have one power LED lit, we can’t get the “run” LED on. > > Any suggestions would be greatly appreciated. > > > Best, > > Jeshua Lacock > Founder/Engineer > <3DTOPO.com> > GlassPrinted.com
I had to configure a tb6560 with nema 34 motors, like that: step time: 10000 step space: 1000 step hold: 1000 step setup: 10000 however the wirings on the board manual were wrong, the *motor* manual saved me. ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://pubads.g.doubleclick.net/gampad/clk?id=278785471&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users