Danny wrote: We are setting up a manual tool change. <Cut>
We use M61 Q (tool Number) this allows us to manually load a tool in the
spindle.
Yes we have to have the tool table.
Jeff JohnsonSuperior Roll & Turning
Message: 1
Subject: [Emc-users] Toolchange M6
To: "'Enhanced Machine Controller (EMC)'"
<[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
I am setting up a manual toolchange CNC router system. In the past
I've worked extensively with Mach3.
Someone just brought up g-code from an automated CAM that started with
"M6 T1", and it barfed on loading because "T1 isn't a defined tool in
the tool table". This was the one and only tool in the file and already
manually zeroed so nothing needed to be done for it, but being an
automated CAM, we couldn't readily tell the CAM program to simply not
say that.
We made a tool table entry for T1 with bogus values ("T1" may be a 1/4
ball mill on one CAM generation, then a 1/8" endmill on another, but at
least it's in a tool table) and yet still got some sort of error (sorry
I don't have it written down), then in the MDI typed "M6 T1" and got it
to accept it it to run. Weird.
Based on what we've done with Mach3, I don't expect we're going to do
toolchanges within a single file. When we generate toolpaths with
Vectric Aspire for example, if you use multiple tools and it's not an
ATC you generate one G-code file per tool.
IIRC, I had Mach3 set up to ignore the FIRST tool setup, because it was
presumed you'd already set that up and to throw a "please change tool"
message with a superfluous stop is annoying. But a second tool
specification WOULD, because that's an actual change. At least I think
it did, I rarely used multiple tools in the same file.
I see there's the "hal_manualtoolchange" component which seems like it
would fix this. Is that the logical answer? Can I ditch the table?
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial!
https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
