You might try Pete.... [email protected] Years ago he put together a sinker driven by basic code. One of the demo's was a thread cut in a file. ;-) There is a massive thread on emc_dev about feed and gap control. Also you might want to contact Steve Stallings as he did some work on a board some years ago. HTH
Dave On 04/30/2016 01:32 PM, Nicklas Karlsson wrote: > Finally I start to get together both hardware and software including > generator for my EDM machine. > > I work with electronics and are new to mechanical machining and EDM in > particular. Do anybody know if anything more than adaptive feed rate > including backwards have been done for EDM? > > > Nicklas Karlsson > > ------------------------------------------------------------------------------ > Find and fix application performance issues faster with Applications Manager > Applications Manager provides deep performance insights into multiple tiers of > your business applications. It resolves application problems quickly and > reduces your MTTR. Get your free trial! > https://ad.doubleclick.net/ddm/clk/302982198;130105516;z > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
