If you are lacking torque, another option is to only run the tap in to your first peck, then hand tap the rest. There should be enough there to get the tap started nice and square, and M8 taps aren't too difficult to drive by hand with a decent wrench.
Adam On 2016-05-07 22:49, Gene Heskett wrote: > > But that will be loads of fun because with the 7mm tap in the chuck, I > had to keep asking for a smaller peck per stroke because even in low > gear, and the current limit in Jon's servo amp set to limit at about 15 > amps, 150% drive for that motors nameplate, ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
