I also have been trying out Fusion 360. It has some drawbacks but at this point I am willing to put up with them for the CAM package. Importing an stl from Alibre works well enough. It puts out some decent G code in my opinion, and the post processor is easy to modify(If you know any javascript).
So its web based, but $300 won't buy you maintenance for any other equally powerful cam. On Tue, Sep 29, 2015 at 1:59 AM, rudy du preez <r...@asmsa.co.za> wrote: > I can also report some success with Fusion 360. I have produced some GCODE > for milling quite easily, creating the CAD model directly in Fusion 360. > > I have also done some turning work, starting with the Siemens turning Post > and modifying it for LCNC. So far I have found it easy to modify. The G33 > work the same is LCNC. The tool change is also easy to change and the > upfront settings as well. G71 becomes G21, G0 becomes G20, CR= becomes R. > > Will need more work to do the rest. > > I also found it very useful to install it on my Macbook as well. It allows > me to work at two different locations on the same project using the Cloud > storage and without any USB sticks. > > Rudy > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
