If the problem is that your able to turn the handwheel fast enough to exceed 
the maximum velocity for the axis and build up a store of pulses.  Perhaps you 
should consider limiting the step size generated by the handwheel to one small 
enough that it is not possible to easily over run the max velocity of the axis. 
 I have seen similar behavior even in large expensive commercial machines with 
Fanuc controls.  Granted you have to turn the wheel really fast, faster than 
you can sustain for a long enough period to build up a significant overrun but 
it is detectable. 

----- Original Message -----
From: "Forum Deswysen" <forum.deswy...@gmail.com>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Sent: Tuesday, May 17, 2016 9:22:53 AM
Subject: Re: [Emc-users] Linuxcnc and Arduino

I have a XHC - HB04 Wireless MPG during LinuxCNC HAL module.
If I turn the crank too fast I have a time delay ???

It's dangerous

2016-05-17 11:21 GMT+02:00 Forum Deswysen <forum.deswy...@gmail.com>:

> Hi Andy,
>
> With a python script and the serial port :
>
> https://www.youtube.com/watch?v=flajZMff28U
>
> https://ckcnc.wordpress.com/basic-arduino-emc-howto/python-emc-module/
>
> With arduino, today I 'm testing my order for tool change turret.
> It works fine
>
>
> @+
>
> Pierre
>
> 2016-05-16 23:48 GMT+02:00 andy pugh <bodge...@gmail.com>:
>
>> On 16 May 2016 at 15:03, Forum Deswysen <forum.deswy...@gmail.com> wrote:
>> > The reaction speed is the same as a button on a Parport entry?
>>
>> That rather depends on how the Arduino connects to LinuxCNC, but the
>> answer is likely to be that it won't be anywhere near as fast.
>>
>>
>> --
>> atp
>> "A motorcycle is a bicycle with a pandemonium attachment and is
>> designed for the especial use of mechanical geniuses, daredevils and
>> lunatics."
>> — George Fitch, Atlanta Constitution Newspaper, 1916
>>
>>
>> ------------------------------------------------------------------------------
>> Mobile security can be enabling, not merely restricting. Employees who
>> bring their own devices (BYOD) to work are irked by the imposition of MDM
>> restrictions. Mobile Device Manager Plus allows you to control only the
>> apps on BYO-devices by containerizing them, leaving personal data
>> untouched!
>> https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
>> _______________________________________________
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>
>
------------------------------------------------------------------------------
Mobile security can be enabling, not merely restricting. Employees who
bring their own devices (BYOD) to work are irked by the imposition of MDM
restrictions. Mobile Device Manager Plus allows you to control only the
apps on BYO-devices by containerizing them, leaving personal data untouched!
https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

------------------------------------------------------------------------------
Mobile security can be enabling, not merely restricting. Employees who
bring their own devices (BYOD) to work are irked by the imposition of MDM
restrictions. Mobile Device Manager Plus allows you to control only the
apps on BYO-devices by containerizing them, leaving personal data untouched!
https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to