On Wednesday 01 June 2016 07:38:32 adit bhargava wrote: > Hello All, > I want to make a button in Axis GUI (Start/Stop) which should give me > TRUE value when I press START button when I switch it on until I turn > it off by STOP button. I should give this START button value (TRUE) to > enable the PWM generator ' pwmgen.enable ' and then press STOP button > to disable it and stop generating the pulses. Can you please suggest > how can I implement it ? > BRAdit
If using axis, you already have one. The icons are small, and try to indicate the direction, and straddling the STOP button, but those are the start buttons, with a plus and minus button below them that if properly configured, will add or subtract 100 revs per click, if of course your motor is variable speed, not often the case with bigger machinery. I have my hal file rigged so that the spindle driver is reset as its being enabled. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
