I spoke too soon, I was able to get it to compile. Getting it to run seems to
be another story.
I was trying to use the RTAI kernel from linuxcnc.org. But it seems the real
time isn't actually running. (granted this is only running in a virtual
machine while I try to figure out what might work.)
Uname -a shows this:
Linux lmde 3.16.0-9-rtai-686-pae #1 SMP PREEMPT Debian 3.16.7-6linuxcnc
(2015-11-30) i686 GNU/Linux
Below is copied from the error window when Linuxcnc failed to open.
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/realtime-3.16.0-9-rtai-686-pae/modules/linuxcnc
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
LINUXCNC - 2.7.3-100-g59889fc
Machine configuration directory is '/home/todd/linuxcnc/configs/sim.axis'
Machine configuration file is 'axis.ini'
INIFILE=/home/todd/linuxcnc/configs/sim.axis/axis.ini
PARAMETER_FILE=sim.var
TASK=milltask
HALUI=halui
DISPLAY=axis
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: io
Starting HAL User Interface program: halui
Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Shutting down and cleaning up LinuxCNC...
Killing task linuxcncsvr, PID=6544
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
Debug file information:
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
6544
PID TTY STAT TIME COMMAND
Stopping realtime threads
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
Unloading hal components
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
RTAPI: ERROR: failed to map shmem
RTAPI: Locked memory limit is 64KiB, recommended at least 20480KiB.
This can cause the error 'failed to map shmem'.
For more information, see
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?LockedMemory
HAL: ERROR: could not open shared memory
halcmd: hal_init() failed: -22
NOTE: 'rtapi' kernel module must be loaded
Kernel message information:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-9-rtai-686-pae ([email protected]) (gcc
version 4.8.4 (Debian 4.8.4-1) ) #1 SMP PREEMPT Debian 3.16.7-6linuxcnc
(2015-11-30)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox
12/01/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at
[c009fff0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fffff]
[ 0.000000] [mem 0x37400000-0x375fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x373fffff]
[ 0.000000] [mem 0x34000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fdfff]
[ 0.000000] [mem 0x37600000-0x377fdfff] page 4k
[ 0.000000] BRK [0x016bf000, 0x016bffff] PGTABLE
[ 0.000000] BRK [0x016c0000, 0x016c0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34f0c000-0x3677dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000E0000 000024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 0xDFFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL
00000061)
[ 0.000000] ACPI: FACP 0xDFFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL
00000061)
[ 0.000000] ACPI: DSDT 0xDFFF0480 001CEB (v01 VBOX VBOXBIOS 00000002 INTL
20100528)
[ 0.000000] ACPI: FACS 0xDFFF0200 000040
[ 0.000000] ACPI: APIC 0xDFFF0240 00006C (v02 VBOX VBOXAPIC 00000001 ASL
00000061)
[ 0.000000] ACPI: SSDT 0xDFFF02B0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL
20100528)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7816MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x016c1000, 0x016c1fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x1fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdffeffff]
[ 0.000000] node 0: [mem 0x00000000-0x1fffffff]
[ 0.000000] On node 0 totalpages: 2097038
[ 0.000000] free_area_init_node: node 0, pgdat c15759c0, node_mem_map
f0b0c020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15633 pages used for memmap
[ 0.000000] HighMem zone: 1869810 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xe0000000-0xfffbffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f77a4000 s49728 r0 d24000 u73728
[ 0.000000] pcpu-alloc: s49728 r0 d24000 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2095262
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-9-rtai-686-pae
root=UUID=3c7faaa9-9bde-4393-a211-cdd09620a93b ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000377fe:00220000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 8285332K/8388152K available (4035K kernel code, 345K
rwdata, 1248K rodata, 484K init, 700K bss, 102820K reserved, 7479240K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffa00000 (2048 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1583000 - 0xc15fc000 ( 484 kB)
.data : 0xc13f1333 - 0xc1581680 (1600 kB)
.text : 0xc1000000 - 0xc13f1333 (4036 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f7006000 soft=f7008000
[ 0.000000] Interrupt pipeline (release #5)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3392.244 MHz processor
[ 0.000060] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6784.48 BogoMIPS (lpj=13568976)
[ 0.000063] pid_max: default: 32768 minimum: 301
[ 0.000071] ACPI: Core revision 20140424
[ 0.001016] ACPI: All ACPI Tables successfully acquired
[ 0.001056] Security Framework initialized
[ 0.001062] AppArmor: AppArmor disabled by boot time parameter
[ 0.001064] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.001074] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001076] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001193] Initializing cgroup subsys memory
[ 0.001209] Initializing cgroup subsys devices
[ 0.001213] Initializing cgroup subsys freezer
[ 0.001216] Initializing cgroup subsys net_cls
[ 0.001225] Initializing cgroup subsys blkio
[ 0.001229] Initializing cgroup subsys perf_event
[ 0.001231] Initializing cgroup subsys net_prio
[ 0.001275] CPU: Physical Processor ID: 0
[ 0.001276] CPU: Processor Core ID: 0
[ 0.003016] mce: CPU supports 0 MCE banks
[ 0.003038] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.003348] Freeing SMP alternatives memory: 20K (c15fc000 - c1601000)
[ 0.003411] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.004416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044168] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06,
model: 3c, stepping: 03)
[ 0.149410] Performance Events: unsupported p6 CPU model 60 no PMU driver,
software events only.
[ 0.174119] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.181805] CPU 1 irqstacks, hard=f70c8000 soft=f70ca000
[ 0.181817] x86: Booting SMP configuration:
[ 0.181826] .... node #0, CPUs: #1
[ 0.192234] Initializing CPU#1
[ 0.197905] mce: CPU supports 0 MCE banks
[ 0.205775] CPU 2 irqstacks, hard=f70fc000 soft=f70fe000
[ 0.205791] #2
[ 0.215971] Initializing CPU#2
[ 0.218621] mce: CPU supports 0 MCE banks
[ 0.225827] CPU 3 irqstacks, hard=f7132000 soft=f7134000
[ 0.225832] #3
[ 0.235877] Initializing CPU#3
[ 0.238434] mce: CPU supports 0 MCE banks
[ 0.240518] x86: Booted up 1 node, 4 CPUs
[ 0.240522] smpboot: Total of 4 processors activated (27137.95 BogoMIPS)
[ 0.241275] devtmpfs: initialized
[ 0.241868] pinctrl core: initialized pinctrl subsystem
[ 0.242137] NET: Registered protocol family 16
[ 0.242254] ACPI: bus type PCI registered
[ 0.242257] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.242625] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it
NX.
[ 0.242628] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
[ 0.242630] PCI: Using configuration type 1 for base access
[ 0.255159] ACPI: Added _OSI(Module Device)
[ 0.255162] ACPI: Added _OSI(Processor Device)
[ 0.255164] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.255167] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.255789] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.257706] ACPI: Interpreter enabled
[ 0.257717] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20140424/hwxface-580)
[ 0.257721] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20140424/hwxface-580)
[ 0.257724] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S3_] (20140424/hwxface-580)
[ 0.257727] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S4_] (20140424/hwxface-580)
[ 0.257732] ACPI: (supports S0 S5)
[ 0.257734] ACPI: Using IOAPIC for interrupt routing
[ 0.257879] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 0.259734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.259738] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[ 0.259743] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.259795] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.259797] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.259799] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
(ignored)
[ 0.259801] acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xffdfffff]
(ignored)
[ 0.259803] PCI: root bus 00: using default resources
[ 0.259806] acpi PNP0A03:00: fail to add MMCONFIG information, can't access
extended PCI configuration space under this bridge.
[ 0.259955] PCI host bridge to bus 0000:00
[ 0.259958] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.259960] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.259962] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 0.259979] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.260281] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.260747] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
[ 0.260976] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
[ 0.261072] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.261074] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.261076] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.261077] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.261200] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
[ 0.264813] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.289348] pci 0000:00:03.0: [1022:2000] type 00 class 0x020000
[ 0.292543] pci 0000:00:03.0: reg 0x10: [io 0xd020-0xd03f]
[ 0.296276] pci 0000:00:03.0: reg 0x14: [mem 0xf0000000-0xf0000fff]
[ 0.316466] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
[ 0.319022] pci 0000:00:04.0: reg 0x10: [io 0xd040-0xd05f]
[ 0.323589] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
[ 0.327225] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
[ 0.342438] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
[ 0.342526] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
[ 0.342573] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
[ 0.342909] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
[ 0.346263] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
[ 0.369516] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
[ 0.370011] pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
[ 0.373783] pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
[ 0.395469] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
[ 0.398753] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
[ 0.406134] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
[ 0.413667] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
[ 0.417564] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
[ 0.422185] pci_bus 0000:00: on NUMA node 0
[ 0.422960] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.423164] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.423222] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.423298] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.423379] ACPI: Enabled 2 GPEs in block 00 to 07
[ 0.423583] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.423586] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.423588] vgaarb: loaded
[ 0.423590] vgaarb: bridge control possible 0000:00:02.0
[ 0.423628] PCI: Using ACPI for IRQ routing
[ 0.423630] PCI: pci_cache_line_size set to 64 bytes
[ 0.423759] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.423762] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[ 0.424003] Switched to clocksource refined-jiffies
[ 0.424246] pnp: PnP ACPI init
[ 0.424273] ACPI: bus type PNP registered
[ 0.424333] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.424384] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.424777] pnp: PnP ACPI: found 2 devices
[ 0.424779] ACPI: bus type PNP unregistered
[ 0.424784] PnPBIOS: Disabled by ACPI PNP
[ 0.464067] Switched to clocksource acpi_pm
[ 0.464076] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.464078] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 0.464538] NET: Registered protocol family 2
[ 0.465179] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.465188] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.465197] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.465206] TCP: reno registered
[ 0.465209] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.465213] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.465354] NET: Registered protocol family 1
[ 0.465364] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.465384] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.465404] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.467072] PCI: CLS 64 bytes, default 64
[ 0.467105] Unpacking initramfs...
[ 0.772182] Freeing initrd memory: 25032K (f4f0c000 - f677e000)
[ 0.772307] platform rtc_cmos: registered platform RTC device (no PNP device
found)
[ 0.772504] RAPL PMU detected, hw unit 2^-0 Joules, API unit is 2^-32
Joules, 4 fixed counters 10737418240 ms ovfl timer
[ 0.772524] microcode: CPU0 sig=0x306c3, pf=0x40, revision=0x0
[ 0.772555] microcode: CPU1 sig=0x306c3, pf=0x40, revision=0x0
[ 0.772590] microcode: CPU2 sig=0x306c3, pf=0x40, revision=0x0
[ 0.772624] microcode: CPU3 sig=0x306c3, pf=0x40, revision=0x0
[ 0.772701] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 0.772988] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.773063] audit: initializing netlink subsys (disabled)
[ 0.773090] audit: type=2000 audit(1466175473.675:1): initialized
[ 0.773309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.773320] zbud: loaded
[ 0.773941] VFS: Disk quotas dquot_6.5.2
[ 0.773995] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.774073] msgmni has been set to 1623
[ 0.774646] alg: No test for stdrng (krng)
[ 0.774669] bounce: pool size: 64 pages
[ 0.774710] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.774809] io scheduler noop registered
[ 0.774812] io scheduler deadline registered
[ 0.774906] io scheduler cfq registered (default)
[ 0.774986] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.774999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.775044] GHES: HEST is not enabled!
[ 0.775059] isapnp: Scanning for PnP cards...
[ 1.131667] isapnp: No Plug & Play device found
[ 1.131748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.131999] Linux agpgart interface v0.103
[ 1.132144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 1.132617] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.132685] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.132800] mousedev: PS/2 mouse device common for all mice
[ 1.133000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.133060] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 1.133069] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.133217] TCP: cubic registered
[ 1.133735] NET: Registered protocol family 10
[ 1.133786] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.134354] mip6: Mobile IPv6
[ 1.134359] NET: Registered protocol family 17
[ 1.134365] mpls_gso: MPLS GSO support
[ 1.134492] Using IPI No-Shortcut mode
[ 1.134569] registered taskstats version 1
[ 1.135020] rtc_cmos rtc_cmos: setting system clock to 2016-06-17 14:57:54
UTC (1466175474)
[ 1.135050] PM: Hibernation image not present or could not be loaded.
[ 1.135196] Freeing unused kernel memory: 484K (c1583000 - c15fc000)
[ 1.135297] Write protecting the kernel text: 4040k
[ 1.135348] Write protecting the kernel read-only data: 1252k
[ 1.135350] NX-protecting the kernel data: 2104k
[ 1.162373] systemd-udevd[73]: starting version 215
[ 1.162611] random: systemd-udevd urandom read with 0 bits of entropy
available
[ 1.167120] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.167125] ACPI: Power Button [PWRF]
[ 1.167201] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 1.167204] ACPI: Sleep Button [SLPF]
[ 1.173167] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.173222] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[ 1.180074] SCSI subsystem initialized
[ 1.186898] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[ 1.187405] pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:b8:d0:a1
assigned IRQ 19
[ 1.187444] pcnet32: Found PHY 0022:561b at address 0
[ 1.187725] pcnet32: eth0: registered as PCnet/FAST III 79C973
[ 1.187757] pcnet32: 1 cards_found
[ 1.187779] libata version 3.00 loaded.
[ 1.192480] ata_piix 0000:00:01.1: version 2.13
[ 1.192974] scsi0 : ata_piix
[ 1.193630] scsi1 : ata_piix
[ 1.193673] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.193675] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.194204] ACPI: bus type USB registered
[ 1.194230] usbcore: registered new interface driver usbfs
[ 1.194240] usbcore: registered new interface driver hub
[ 1.194267] usbcore: registered new device driver usb
[ 1.199828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.199844] ahci 0000:00:0d.0: version 3.0
[ 1.202380] ehci-pci: EHCI PCI platform driver
[ 1.202851] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.203525] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
[ 1.203625] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 1.203627] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.204017] scsi2 : ahci
[ 1.204176] scsi3 : ahci
[ 1.204225] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100
irq 21
[ 1.204229] ata4: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806180
irq 21
[ 1.204869] ehci-pci 0000:00:0b.0: EHCI Host Controller
[ 1.204875] ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus
number 1
[ 1.204986] ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000
[ 1.216411] ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.216474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.216476] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.216478] usb usb1: Product: EHCI Host Controller
[ 1.216481] usb usb1: Manufacturer: Linux 3.16.0-9-rtai-686-pae ehci_hcd
[ 1.216483] usb usb1: SerialNumber: 0000:00:0b.0
[ 1.216651] hub 1-0:1.0: USB hub found
[ 1.216660] hub 1-0:1.0: 12 ports detected
[ 1.217582] ohci-pci: OHCI PCI platform driver
[ 1.218050] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 1.218057] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus
number 2
[ 1.218097] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
[ 1.274318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.274333] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.274343] usb usb2: Product: OHCI PCI host controller
[ 1.274353] usb usb2: Manufacturer: Linux 3.16.0-9-rtai-686-pae ohci_hcd
[ 1.274361] usb usb2: SerialNumber: 0000:00:06.0
[ 1.274876] hub 2-0:1.0: USB hub found
[ 1.274943] hub 2-0:1.0: 12 ports detected
[ 1.349014] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.349492] ata2.00: configured for UDMA/33
[ 1.350476] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0
PQ: 0 ANSI: 5
[ 1.528956] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.529528] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.529542] ata3.00: 33554432 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.530680] ata3.00: configured for UDMA/133
[ 1.531288] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0
PQ: 0 ANSI: 5
[ 1.853951] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.854343] ata4.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.854354] ata4.00: 16777216 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.854808] ata4.00: configured for UDMA/133
[ 1.855200] scsi 3:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0
PQ: 0 ANSI: 5
[ 1.875269] sd 2:0:0:0: [sda] 33554432 512-byte logical blocks: (17.1
GB/16.0 GiB)
[ 1.875584] sd 2:0:0:0: [sda] Write Protect is off
[ 1.875595] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.875603] sd 3:0:0:0: [sdb] 16777216 512-byte logical blocks: (8.58
GB/8.00 GiB)
[ 1.875671] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.875825] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.875836] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.875938] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.882369] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.882381] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.883292] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.886341] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.886672] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.887098] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.892047] sda: sda1 sda2
[ 1.893642] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.905953] sdb: sdb1
[ 1.906625] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.774111] Switched to clocksource tsc
[ 4.213974] floppy0: no floppy controllers found
[ 4.214077] work still pending
[ 4.261744] device-mapper: uevent: version 1.0.3
[ 4.262117] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
[email protected]
[ 4.334323] PM: Starting manual resume from disk
[ 4.334328] PM: Hibernation image partition 8:1 present
[ 4.334329] PM: Looking for hibernation image.
[ 4.349642] PM: Image not found (code -22)
[ 4.349646] PM: Hibernation image not present or could not be loaded.
[ 4.419245] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 5.174576] random: nonblocking pool is initialized
[ 5.567389] systemd-udevd[353]: starting version 215
[ 5.862018] ACPI: AC Adapter [AC] (on-line)
[ 5.965118] input: Unspecified device as
/devices/pci0000:00/0000:00:04.0/input/input5
[ 5.965188] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at
00000000f0400000 (size 0x400000)
[ 5.965191] vboxguest: Successfully loaded version 4.3.18_Debian (interface
0x00010004)
[ 6.037691] piix4_smbus 0000:00:07.0: SMBus base address uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 6.041391] ppdev: user-space parallel port driver
[ 6.119102] [drm] Initialized drm 1.1.0 20060810
[ 6.262762] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on
minor 0
[ 6.368722] snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM
optimization
[ 6.383060] alg: No test for crc32 (crc32-pclmul)
[ 6.456110] intel_rapl: RAPL domain package detection failed
[ 6.456196] intel_rapl: RAPL domain core detection failed
[ 6.456265] intel_rapl: RAPL domain uncore detection failed
[ 6.456363] intel_rapl: RAPL domain dram detection failed
[ 6.456372] intel_rapl: no valid rapl domains found in package 0
[ 6.475444] intel_rapl: RAPL domain package detection failed
[ 6.475630] intel_rapl: RAPL domain core detection failed
[ 6.475740] intel_rapl: RAPL domain uncore detection failed
[ 6.475817] intel_rapl: RAPL domain dram detection failed
[ 6.475826] intel_rapl: no valid rapl domains found in package 0
[ 6.514231] intel_rapl: RAPL domain package detection failed
[ 6.514396] intel_rapl: RAPL domain core detection failed
[ 6.514534] intel_rapl: RAPL domain uncore detection failed
[ 6.514636] intel_rapl: RAPL domain dram detection failed
[ 6.514645] intel_rapl: no valid rapl domains found in package 0
[ 6.527779] intel_rapl: RAPL domain package detection failed
[ 6.527793] intel_rapl: RAPL domain core detection failed
[ 6.527804] intel_rapl: RAPL domain uncore detection failed
[ 6.527814] intel_rapl: RAPL domain dram detection failed
[ 6.527821] intel_rapl: no valid rapl domains found in package 0
[ 6.559292] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 6.568513] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input6
[ 6.692889] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[ 9.032137] floppy0: no floppy controllers found
[ 9.032225] work still pending
[ 9.879448] Adding 3808252k swap on /dev/sda1. Priority:-1 extents:1
across:3808252k FS
[ 9.921783] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 10.009524] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 10.069095] input: BRLTTY 5.2dev Linux Screen Driver Keyboard as
/devices/virtual/input/input7
[ 10.420427] lp: driver loaded but no devices found
[ 10.567571] fuse init (API version 7.23)
[ 12.307509] vboxsf: Successfully loaded version 4.3.18_Debian (interface
0x00010004)
[ 15.346309] Bluetooth: Core ver 2.19
[ 15.346325] NET: Registered protocol family 31
[ 15.346327] Bluetooth: HCI device and connection manager initialized
[ 15.346333] Bluetooth: HCI socket layer initialized
[ 15.346336] Bluetooth: L2CAP socket layer initialized
[ 15.346344] Bluetooth: SCO socket layer initialized
[ 15.435648] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.435651] Bluetooth: BNEP filters: protocol multicast
[ 15.435657] Bluetooth: BNEP socket layer initialized
[ 15.588581] systemd-hostnamed[2331]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable. Please
install nss-myhostname!
[ 15.988249] cfg80211: Calling CRDA to update world regulatory domain
[ 16.036158] cfg80211: World regulatory domain updated:
[ 16.036163] cfg80211: DFS Master region: unset
[ 16.036165] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.036167] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 16.036170] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 16.036172] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 16.036174] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 16.036176] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 16.036178] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 16.036180] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 16.036182] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 16.607143] pcnet32 0000:00:03.0 eth0: link up, 100Mbps, full-duplex
[ 20.030983] systemd-logind[2798]: New seat seat0.
[ 20.046092] systemd-logind[2798]: Failed to start user service: Unknown
unit: [email protected]
[ 20.056519] systemd-logind[2798]: New session c1 of user todd.
[ 854.682102] systemd-udevd[6196]: starting version 215
[ 876.590193] I-pipe: head domain RTAI registered.
[ 876.590197] RTAI[hal]: mounted. ISOL_CPUS_MASK: 0, LINUX CPU ISOLATED MAP:
0).
[ 876.590200] SYSINFO - # CPUs: 4, TIMER NAME: 'lapic', TIMER IRQ: 2305, TIMER
FREQ: 62195219, CLOCK NAME: 'tsc', CLOCK FREQ: 3392244000, CPU FREQ:
3392244000, LINUX TIMER IRQ: 2305.
[ 876.613084] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 876.613553] , kstacks pool size = 524288 bytes.
[ 876.613574] RTAI[sched]: hard timer type/freq = lapic/62195219(Hz); timing:
oneshot; linear timed lists.
[ 876.613576] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq =
3392244000 hz.
[ 876.613578] RTAI[sched]: timer setup = 1967 ns, resched latency = 0 ns.
[ 876.632354] RTAI[math]: loaded, using NEWLIB.
[ 881.010616] RTAI[math]: unloaded.
[ 881.012963] SCHED releases registered named ALIEN BXL9CG
[ 881.012981] SCHED releases registered named TASK THRSRV
[ 881.012986] SCHED releases registered named ALIEN PEDV$D
[ 881.013025]
SHM_CLEANUP_MODULE releases: 'BXL9CG':0x48414c32:1212238898 (307200).
[ 881.019912] RTAI[malloc]: unloaded.
[ 881.118726] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps
0, syscalls 0).
[ 881.126382] I-pipe: head domain RTAI unregistered.
[ 881.126930] RTAI[hal]: unmounted.
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports. http://sdm.link/zohomanageengine
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
