Hi all; I have been pulling my hair out trying to find a simple 802.11# unit.
What I need is a small module that takes RJ45 input and makes it a wireless connection. Much like a USB wireless dongal. Think of it as an inline wireless adaptor, a single IP pass through not a full router bridge. I want to mount a IP camera up on a power pole. This pole has my electric meter and a conduit up to a junction box with motion activated flood lights, so I have a place to install a power supply. Problem is this pole is out by its lonesome and all lines out are in underground conduits so for this island with power I need a wireless solution. It is a rough environment, temps from -30F to 110F are possible here in Colorado. Power company is fine with me adding the equipment within +/- 18" of the flood lights, however if I were to run any cables from the pole they would have to be in underground conduits and that requires permits and underground tracing to locate where all prior conduits are before digging. Everything I have been finding in my searches requires a USB interface - if nothing else to supply power. Any ideas? BTW I will be adding another dedicated enclosure for the transmitter and power supplies. All other locations have POE runs but this one spot can't get there from here. Thanks ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
