Hi Dave I'd say from bottom to top but just my 2c I'd suggest you look into heat exchangers
they are passive and do not let outside air in nor inside air out both airs hit a heat sink barrier on the cabinet wall inside air temp is affected by the heatsinks temp but no air passes from inside to outside i use them on the edm's as the outside air is oily sticky carbon filled plus whatever other cruft is in the shop air keeps insides dead clean and cool enough for electrics ( not cold, just nice ) again my 2c tjtr33 tomp On 07/15/16 01:06, dave wrote: > I'm trying to bring my Mazak V5 back online. > Is usual practice to blow the cooling air up thru the unit or suck it > down and out? > Both ends have gravel strainers (:-)) on them so that is no help. > TIA > > Dave > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
