Mesaflash allows you to change the IO configuration, but only to a number of premade configs, not arbitrary. The GPIO has few limits but the location of special-purpose STEPx/DIRx pairs are fixed. But those locations change based on the mesaflash file you use.
Danny ---- Gene Heskett <ghesk...@shentel.net> wrote: > Greetings all; > > Those breakout boards I bought 2 of arrived today, and are apparently pin > assigned according to what a mach3 system might use, including the male > db25 on the pcb. It apparently has pre-assigned output pin groups that > are about as incompatible with a 5i25 as could be. I never did find > where the X axis for my lathe comes out, but the Z is apparently in the > B group of 4. I ran the spindle, expecting to see the analog of the pwm > someplace, but if its there, it is routed to the db15 on the other end > of the card. So I go to look at the pdf of the board thats on the mini > cd-r, and found it, and a .doc file, both of which are password > protected. Its not that much money, and it would cost thru the nose to > put a stop payment on it, but I am tempted anyway. What a maroon! > > The board is this one. > <http:///ebay_order.html?param=ab562ace2e55b25232b5b0343553d251cacc4d07f20cc1c0c4c0dc182854920714f1f1b6b4303135b734363275f603a92bce078a8606039949992940667a6a5eaaa1a5b149716a727e1150b418a4ab24233537bf34af243133af38bb12285aa66465540b00> > > Anybody recognize it, or has used it? Better yet, knows how to unlock > the pdf? Nothing I have here, including libreoffice, can touch the pdf > or the .doc files for the card. All sorts of adv stuff for his driver > boxes, you can look at them, but nothing on the card itself. > > I'd love to be able to buy about a 6 pack of cnc4pc's old C1G BoB's, as > it has an led for state on every pin, a great troubleshooting tool. But > its been disco'd. Even at 80 plus bucks it was a good card. > > Thanks all, for any help on this. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
