I designed a 3D printed case for it, with a solid lid and one with slots so the screw terminals can be turned with the lid on. The solid lid would be for a permanent install where you don't want easy access for people to fiddle with it. Mounting tabs would be easy to add with any 3D software that can import and export STL files.
http://www.thingiverse.com/thing:1732470 From: Ron Ginger <rongin...@roadrunner.com> To: emc-users@lists.sourceforge.net Sent: Wednesday, September 7, 2016 6:05 AM Subject: Re: [Emc-users] Need unlocked copy of a pdf for a breakout > Yes and no. No linkage between that pinout, and what pin this is on the > db25 connector. And its apparently a near 100% mis-match between a > 5i25's useage of the pins and whatever the hell mach3 uses. So unless > that is available in the password locked .pdf or .doc files, these cards > are only usefull with a mach3 install. And utterly worthless to me. That is definitely NOT the mach3 pin out. In fact I dont think it can work with mach3. it uses some of the higher pin numbers as step control pins, and I think mach3 only supports pins 2-9 for the step signals, the others can be used for output signals, like spindle control. It does look link a nice board- I like having screw terminals and header pins for connections, it gives better choices. ron ginger ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
