Greetings all; I probably should have sent this to the emc-users list in the first place...
The *buntu references have disappeared when it was copied to the configs tree. But nothing else has changed, so here is a paste of its startup output: gene@coyote:~/linuxcnc/configs/sim.gmoccapy$ linuxcnc -l LINUXCNC - 2.7.7-39-gcddff75 Machine configuration directory is '/home/gene/linuxcnc/configs/sim.gmoccapy' Machine configuration file is 'gmoccapy_lathe_imperial.ini' Starting LinuxCNC... Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal Note: Using POSIX non-realtime Found file(REL): ./spindle_sim.hal Found file(lib): /usr/share/linuxcnc/hallib/simulated_home.hal **** GMOCCAPY GETINIINFO **** Preference file path: /home/gene/linuxcnc/configs/sim.gmoccapy/gmoccapy_lathe_imperial.pref [] /usr/bin/gmoccapy:236: GtkWarning: Invalid icon size 48 self.widgets.window1.show() task: main loop took 0.094805 seconds **** GMOCCAPY INFO **** **** gmoccapy screen 2 found **** **** GMOCCAPY INFO **** **** Invalid embeded tab configuration **** **** No tabs will be added! **** **** GMOCCAPY INFO **** **** audio available! **** **** GMOCCAPY INFO **** **** No virtual keyboard installed, we checked for <onboard> and <matchbox-keyboard>. **** GMOCCAPY INFO **** **** no valid probe config in INI File **** **** disabled tool measurement **** **** GMOCCAPY INFO: Gcode.lang found **** (gmoccapy:28507): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion `lm->priv->ids == NULL' failed **** GMOCCAPY INFO : inifile = /home/gene/linuxcnc/configs/sim.gmoccapy/gmoccapy_lathe_imperial.ini ****: **** GMOCCAPY INFO : postgui halfile = gmoccapy_postgui.hal ****: So what do I need to do, after I've read the fine manual, to fix the reported errors/warnings? I have real keyboards for instance. In the settings screen, all keyboard related checkboxes are greyed out. The Fine Manual mentions <onboard> but doesn't say what section it belongs in or even an example other than a bash script to set the keyboard profile and language. I'm going to install the matchbox virtual, and see if it can find it. But synaptic wants to update enough stuff I might as well reboot because kmail is in the list of replaced packages. Thanks everybody. I have since this original post, installed the matchbox-keyboard package. It finds that on startup, however a couple lines later: No option 'show_keyboard_on_file_selection' in section: 'DEFAULT' but I can now check the checkboxes for keyboard use, and they seem to work. But I can't get a file selection requester except in the jump to option in the settings. But it doesn't name the faulty file, and a grep -R for DEFAULT in the config directory does not find a [DEFAULT] section. So where/which file do I add this [DEFAULT] section? Thanks all. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
