On Friday 28 October 2016 18:47:59 andy pugh wrote: > On 28 October 2016 at 23:28, Gene Heskett <ghesk...@shentel.net> wrote: > > They do not have links on either US website. The pdf yup, firmware? > > Not for a 7i90HD. > > The firmware is there: > http://store.mesanet.com/index.php?route=product/product&product_id=29 >1&search=7i90 > > Click the "Specification" tab (OK, I grant that that is an odd name to > use for the tab) and there is the pdf document and the support > software. > > Download that file, and look in "configs" / "Hosmot2"
Seriously huge & confusing, must be 100 or more .bit files that are not discussed in the docs. I'll need a small bucket of bit io, 2 stepgens, an encoder and a pwmgen in the initial profile. Every bitfile discussed in the pdf has multiples of those. Like 8 of everything? Boggles what mind I have left. So, suggested files to install with mesaflash-3?, once the r-pi-3 is up and running of course. At this point I haven't a clue whats next after the r-pi-3 has arrived. All I know at this point is that I'll need independant lines for fwd and reverse on the spindle motor, an inverted pwm, 12v pwr & ground, two steppers, 2 dirs, some grounds and some 5 volts. Everything else can be done with gpio stuffs. I think this is gonna be a serious backache, but certainly no worse than trying to use these Mach bobs has been. Thanks everybody. Head me off before I get to the pass if you can. :) Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ The Command Line: Reinvented for Modern Developers Did the resurgence of CLI tooling catch you by surprise? Reconnect with the command line and become more productive. Learn the new .NET and ASP.NET CLI. Get your free copy! http://sdm.link/telerik _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
