11/04/2016 12:57 PM, sam sokolik rašė: > I know during testing at some point the G0 -> Feed moves and feed moves > -> G0 were exact stop. I think it was changed to make it act like it > did with the previous TP. My thoughts at the time was to make it a hal > pin or maybe a INI setting. > > sam
Please, don't do this. This setting has to be dynamically selectable and controlled from G-code. I had at least one case where sluggishness of G0 full-stops drove us crazy. Instead of going around the workpiece it "danced" stopping at each of 6 or 8 corners. And time was important there. We could not find another solution like to use G1 and insane feed-rates. This was 5 axis machine and those feed-rates where interpreted in degrees and/or millimeters.. ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
