On Mon, 7 Nov 2016, Gene Heskett wrote: > Date: Mon, 7 Nov 2016 04:26:21 -0500 > From: Gene Heskett <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: [email protected] > Subject: [Emc-users] unbricking the pi > > Greetings all pi players; > > Is there a key to be held down during boot that will give me the effect > of adding single to the kernel command line, effective bypassing the > login so I can stand a snowballs chance of running raspi-config and > undoing the dumbassed mistake I made? > > Then is there anything that can be done to make the wireless keyboards > work? Wally didn't have any more of the logitech k-360, so I bought an > unknown "darkweb" that looks like a clone of the k-360, but has a > smaller numbpad with a touchpad under it, about 2" wide by 1.35" high > thats worthless as a full width stroke only moves the mouse about an > inch on the monitor screen. And that is still subject to the cold > molasses motion. > > Second unrelated question, I see in the x86 /lib/modules tree, > 3 "*spi.ko" modules. Can one of them do this spi over an epp parport? > Any documentation there may be, has never made it to /usr/share/doc >
> Or, if Peter can tell me how to reprogram this 7i90HD back to accessing > it via epp when it is now set for spi access? I am sold on the plethora > of I/O it can do and would like to be able to use it on this lathe from > an x86 box. There are 2 independent jumper selectable configs on the 7I90HD (see manual) I would always leave one config in EPP mode. If you wish to reprogram the SPI config, you power cycle the 7I90HD with the jumper in the EPP position move the jumper back to the SPI position and then program whatever bit file you wish via EPP (never running mesaflash with the jumper in the EPP position) > > Thanks everybody. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > ------------------------------------------------------------------------------ > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
