On Thursday 10 November 2016 23:32:17 Marius Alksnys wrote: > At least one axis has to have HOME_SEQUENCE = 0 for home-all to work. > Thanks Marius. Or as I just found -1 for both works, as does a x=0 and z=1. I don't have the box assembled enough to take it to the lathe and hook up what I do have working yet.
The 5v psu came in today, but I must have clicked on the wrong one, its a 9-15 volt AC input, so I went back and found the line powered version of the same supply, an about 55% of the same price. Probably Monday delivery. In the meantime, get off my duff and finish up the encoder over the weekend. I have to make a small, curved pcb to serve as an anchor and junction between the encoder and the cable. Then I cannot delay moving the box to within reach of the cables as that will be the final arbiter calibration between requested speed and what I asked for. But I need to round up another section of that 1.5" square tubing to make that mount first. ( after I check in the woodshed. There could be a piece in there I've forgotten about in the 15 years since I made the 6 pocket block mold to pour 300 some of the retaining wall blocks in) The encoders speed output is as accurate as the ntp locked clock, which the r-pi is I assume using. The gear its watching has 60 teeth, aka 240 edges a rev or 1.5 degrees of rotation per edge of an A/B/X encoder. g76 and g33.1 anybody? > 11/11/2016 01:35 AM, Gene Heskett rašė: > ... > > > All applied ANAICT but now I have lost the "home all" function. > > > > Both are set for HOME_SEQUENCE = 1, with all other HOME statements > > commented out as they were all along, and it worked. And I've gone > > thru both the .ini and the .hal files removeing or moving any > > "trailing comments" Clue plz? > > ---------------------------------------------------------------------- >-------- Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
