On Wednesday 14 December 2016 22:03:17 MC Cason wrote: > Gene, > > https://oshpark.com/users/sign_up > Well, it did sound good, but: 1 error prohibited this user from being saved:
The email. the only one I have, has been previously taken. I don't recall signing up, and if I did, my chances of recalling my passwd are somewhere between point triple ought nothing and zip. And neither does either browser. So since you have to know your old pw before you can change it, I seem to be screwed. They sent me a couple code numbers, but I've no idea of the lifetime, but by the time they arrived in my inbox, they must have expired, and not more than 10 minutes had passed on either attempt. The second attempt wasn't over 4 or 5 minutes. But that number, copied from the email, and pasted into the box on their web page form, was an invalid number. Shrug. Its their problem as I'll have enough stuff to make it myself in a day or so. If the mail ever brings me an order from digi-key that digi-key claims was mailed, this past Sunday evening late. > On 12/14/2016 08:53 PM, Gene Heskett wrote: > > On Wednesday 14 December 2016 13:14:34 andy pugh wrote: > >> On 14 December 2016 at 15:47, Gene Heskett <ghesk...@shentel.net> > > > > wrote: > >>> Haven't tried, its been screwed for close to the time limit of my > >>> backup storage setup. > >> > >> You said: > >> "But uspace-linuxcnc is > >> running, gfx and all, on the R-Pi 3b, smoothly enough for this > >> picky old man. " > >> > >> On the 29th November. That's 2 weeks ago. > > > > well, so much for that Idea. tar was cleaning house, getting ready > > to overwrite everything non-volatile from / up, and its crashed. No > > bootable card left. > > > > Convinced as I am that I've somehow blown a gpio pin anyway, I just > > ordered 2 more pi 3b's, with heat sink kits from mcm @$35 each plus > > tax & shipping. And Jeff Epler has not replied as to whether he has > > any spares of the spi adaptor board he designed and put on OSHPark > > share. And I can't get it from OSHPark because there is no place to > > create an account, only to login if you have one. Strange way to do > > business IMO. Or my cataracts are worse than I thought. Shudder. > > I'll put another sd card in the writer & put another copy of Jessie > > on it, but nuke the passwds for root and pi before I stick in back > > in this pi so I can at least set a longer root pw, and a user pw > > that is the same system wide. > > > > But as unstable as the stock install is with the rt kernel, I'll > > have the next 2 pi's on hand for insurance before I get serious > > about loading up lcnc again. Or just say screw it and bring the old > > Dell & its 5i25 close enough to work it. If I could find some > > breakouts usable. What I have has 1/3rd of its ports screwed up > > with something or other for Machs bastard setup. And CNC4PC has > > discoed their good board. Rev 4 of the C1G. I thought I was getting > > one from John T., but it was a rev3, with half a bushel of 20 > > kilohertz max opto's on it, Rev 4 has no opto's, and a 10ns > > propagation time in either direction. Great card even if it was > > $90. With a nice brite led on every line going both ways, makes a > > great troubleshooting tool when first hooking stuff up... Encoder > > acting funkity? Roll the chuck a few degrees and watch the leds. > > > > I am about done with re-inventing these wheels only to have shitty > > hardware like these female-female jumper cables destroying something > > damned near every day. If I had been able to carve hal code with > > half the time I've spent trying to stay half a skip ahead of these > > jumpers and apt, I'd have been making swarf 2 weeks ago instead of > > going to bed so damned discouraged I am not getting enough sleep > > every night for the last 2 weeks. > > > > I am not kidding about these jumpers, you can peel one off the > > bunch, plug it over a pin on an old 40 pin ide interface card, > > slowly turn the card over so its hanging down, and it will fall off > > the pin before its hanging straight down. I saw how cheap they were, > > and bought some from a different vendor for a dollar more, same > > exact crap. > > > > I just found an old 40 wire IDE cable with 3 connectors on it. So > > I'll cut one end off with about an inch of cable I can strip and > > stick it in some solderable perfboard, make up another 8" 26 wire > > with the 26 pin IDC header plugs to fit the 7i90 if and when they > > find my mailbox, and make up an adapter cable, with series > > terminating R's on the perfboard, that cannot be installed wrong as > > long as the pin one arrows are obeyed. > > > > Not your fault Andy, but that Murphy that wrote all those laws lives > > here. Apparently for free. > > > > So I'll get started on a new cable tonmorrow. > > > > Take care, Andy. > > > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
