Maybe not related to this but am I seeing correctly that you are using 126V 6A DC current? I am looking for 220V AC to 80V 8A DC transformer. Where can I buy it?
Regards On 20 Dec 2016 4:15 a.m., "Jon Elson" <[email protected]> wrote: On 12/19/2016 01:35 PM, Steve from Tube Gauge wrote: > On Sat, 17 Dec 2016 15:56:13 -0600 Jon Elson wrote: > > "Depending on the size of the motors, it may be possible to > run the machine with the Pico Systems brushless PWM servo > amp, it is good for up to 20 A peak. If you have the model > of the motor, I can look that up." > > The motor "TYPE" is A06B-0134-B002, and "NO." is G-846379. 126 V, 8 poles, 5.8A at stall. > Ah ha! Then, I think our brushless PWM servo amp might work! 20/5.8 = 3.45 times the stall rating is just about right. I tried looking this motor up and was not able to find any info on it. But, the 126 V 5.8A stall is pretty much all I need. Can you see a label on the encoders? I have converters that handle most of the Fanuc encoders, but there are a few that my converters will not talk to. So, if this all is compatible, the setup would be a Universal PWM controller (for up to 4 axes), plus one Fanuc encoder converter and one brushless PWM servo amp per axis. Jon ------------------------------------------------------------ ------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/intel _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/intel _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
