Merry Christmas Nicklas On 12/23/16 05:12, Nicklas Karlsson wrote: > User interface seems rather simple although I have some problem with widgets > to get numbers into linuxcnc. I almost got something useful to test machine > manually but for real machining programming is needed. > > Happen to know any more or less g-codes for these motions? g-codes for > control of flush? g-codes for control of EDM power source? > i think Mcodes are more suited to machine functions, gcodes are for motion mcodes can be scripts and easily managed i uploaded mcodes before with python commands to change edm generator on/off/current/polarity a python script can be very powerful, it can issue hal commands and alter hardware > As soon as user interface start to be more useful it is also time to create > som kind of fork so I could upload it to the repository. I guess the the same > will also happen with the g-codes then I start to look at them. great! i am anxious to look at it > > Regards Nicklas Karlsson > > regards Tomp Tjtr33
------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/intel _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
