On 2 January 2017 at 04:39, Cecil Thomas <wctho...@chartertn.net> wrote: > How and where do I 'invert the pwm'
The PWM signal appears to be on GPIO number 8 from the 5i25. So insert this line in your HAL file somewhere: setp hm2_5i25.0.gpio.008.invert_output 1 (the docs are here, but could certainly be clearer, it's too complicated a subject to be properly covered by a simple manpage layout like that) http://linuxcnc.org/docs/2.7/html/man/man9/hostmot2.9.html#General%20Purpose%20I/O -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
